Custom M10 M18 Nylon Dome Cap Nuts M16 Acron nuts Black white round head Plastic Nuts
Product Description
Cap nuts are used in the same way as hexagonal nuts. They are characterised by the fact that the main nut does not slide easily, but can only be tightened with a live spanner, a dull spanner, a dual-purpose spanner (open part) or a special square-hole socket spanner.
They are mainly used for rough and simple parts, in tyres and front and rear axles of cars, tricycles, electric cars, etc. They are also used for fixing the bases of road light frames and some mechanical equipments which are often exposed to sunlight and rain.
Hexagonal Nuts
Hexagonal nuts are mainly used with bolts and screws to connect fasteners. According to the nominal thickness is divided into I type, II type and thin three kinds of nuts, more than 8 levels of nuts are divided into I type and II type two types, I-type nuts are divided into A, B, C three levels.
Applications
Among them, A level and B level nuts are suitable for small surface roughness, high precision requirements of machines, equipment and structures, while C level nuts are used for surface roughness, high precision requirements of machines, equipment or structures; II type hexagonal nuts are thicker, more often used in the occasions that need to be mounted and dismounted.
Square Nuts
Because of its square shape, it is also known as a square nut, also called a square nut or square nut. Square nut is a kind of welded nut, which is a kind of metal melted by high temperature and then welded in the middle of two products to play the role of fastening.
Applications
The fastening effect of this connection will be very good, will not be easy to loosen, is widely used in road traffic, home building materials and other industries. Almost covers all areas of fastener needs, is one of the common mechanical fasteners.
Applications
Machined Nylon (PA) Properties and Grades
Nylon (PA) is known for its high crystallinity, which produces strong, strain-resistant components. In addition, the use of nylon reduces the need for extensive lubrication, reduces noise and eliminates wear, corrosion and theft problems.
There are two common grades of nylon 6 and nylon 6/6 nylon that are noteworthy for their properties and uses. They can be used interchangeably in a variety of applications with some property differences.
- Nylon 6 is commonly produced in two forms: a high-strength type for textile applications and a high-strength type for industrial use.
- Nylon 6/6 has many industrial uses, from thin-walled parts to large, thick-walled bearings. It is also an excellent candidate for metal replacement.
Advantages of Nylon
- High mechanical strength, good toughness, and high tensile and compressive strength
- Smooth surface, low coefficient of friction, wear-resistant
- Corrosion resistant - very resistant to alkali and most salt solutions
- Self-extinguishing, odourless, non-toxic, weather-resistant
That is, the bolt, nut strength level is the same (bolt 8.8 and nut 8 strength level is the same, because the bolt after the '.8' that is the yield strength is 80% of the tensile strength.)
But consider the use of the situation if the nut is not easy to replace, the bolt is easier to replace, can also be changed to bolt 4.8 nut 5.
Material Composition
| No. | C% | Cr% | Ni% | Mo% |
| 304 | 0.07 | 17.5-19.5 | 8.0-10.5 | / |
| 316 | 0.08 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 |
| 301 | 0.15 | 16.0-18.1 | 6-8 | / |
| 310 | 0.08 | 24-26 | 19-22 | / |
| 304L | 0.03 | 18-20 | 8-12 | / |
| 316L | 0.03 | 16-18 | 10-14 | 2-3 |
| 321 | 0.08 | 17-19 | 9-12 | / |
